How to Replace Suzuki King Quad Axles
ATV’s are designed for long term vigorous use. It is not uncommon for them to get muddy and dirty as they are also used to rough terrains and even rougher drivers. However, this makes them vulnerable to some damage and therefore it is not uncommon for the axle to give out over time.
A Thing or Two about Replacing Quad Axles
Replacing a Suzuki King Quad Axle can be a costly venture. Therefore it is important to keep your ATV in good working condition. Always inspect the ATV parts at least once a month and thoroughly clean them. Furthermore, depending on the make and model of your ATV, some axles may be a bit difficult to find or may require special ordering from a different state. Therefore it is always best to have a spare Suzuki king quad axle on hand. Should the current axle get damaged, the replacement will come in handy and the ATV will be up and running with little downtime.
Suzuki ATV and Quad Axles
Suzuki ATVs are known for their popularity and just like any other ATV they can also encounter broken axles. This article will focus on replacing Suzuki King Quad axles in order to better equip readers with the knowledge and procedures involved in successful removal and replacement.
Suzuki King Quad Axle Removal Procedure:
The entire process consists of two parts. The first part entails removing the defective Suzuki axle. The second part is about installing the new one.
Tire Removal – The very first step is to remove the tires in order to get to the quad axle. To do that, the ATV must be put on a stand or a jack.
Caliper Removal – Removing the tires will expose the break caliper. It must be removed in order to get to the axle. Remove it using the appropriate tools.
Hub Nut Removal – Getting to the Suzuki quad axle requires the removal of quite a lot of pieces. Next in line for removal is suzuki king quad 500 top speed hub nut. This is the most difficult part of the entire procedure as it requires a lot of force to loosen up the large hub nut. Once removed, the broken axle can easily be retrieved.
Suzuki King Quad Axel Installation:
The installation follows the exact same procedure mentioned above in reverse.
• Once the faulty Suzuki king quad axle is removed, simply slide the new axle in.
• Install the hub nut back in place and tighten it as hard as possible.
• Install the brake calipers.
• Put the tires back on the ATV
• Drop the ATV off the stand or jack.
The process itself doesn’t look much difficult on paper however in actuality it does require a certain degree of patience and skill. Nevertheless its not something one must go to an ATV mechanic to get fixed. ATV’s are similar to automobiles in many ways because the underlying mechanics of both types of machinery are the same. Suzuki king quad axles are sturdy pieces of equipment but even they can get damaged over the course of time. So push your ATV to the limits if you must, but do not overdo it.